OrcaSlicer Settings for perfect bridges

Model used for this experiment   Settings that gave me the best results: Quality -> Bridging -> Bridge flow ratio = 1.3 Quality -> Bridging -> External bridge density = 104% Speed -> Overhang speed -> Bridge -> External = 10 mm/s Source:  

Weapons and Trucks for Hard Truck Apocalypse / Ex Machina, Hard Truck Apocalypse: Rise of Clans

Trucks Weapons for Hard Truck Apocalypse / Ex Machina Weapons for Hard Truck Apocalypse: Rise of Clans

Copyparty Docker quick setup

Create directory and enter it. /home/USER/Copyparty Create docker-compose.yml, change /cfg and /w (share) path in volumes section.

docker-compose.yml

YAML

services: copyparty: image: copyparty/ac:latest container_name: copyparty user: "1000:1000" ports: - 3923:3923 volumes: - /home/USER/Copyparty/data:/cfg:z - /mnt/TOP_DIR_TO_SHARE/:/w:z environment: LD_PRELOAD: /usr/lib/libmimalloc-secure.so.NOPE # enable mimalloc by replacing "NOPE" with "2" for a nice speed-boost (will use twice as much ram) PYTHONUNBUFFERED: 1 # ensures log-messages are not delayed (but can reduce speed a tiny bit) stop_grace_period: 15s # thumbnailer is allowed to continue finishing up for 10s after the shutdown signal healthcheck: # hide it from logs with "/._" so it matches the default --lf-url filter. test: ["CMD-SHELL", "wget --spider -q 127.0.0.1:3923/?reset=/._"] interval: 1m timeout: 2s retries: 5 start_period: 15s

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26

services:   copyparty:     image: copyparty/ac:latest     container_name: copyparty     user: "1000:1000"     ports:       - 3923:3923     volumes:       - /home/USER/Copyparty/data:/cfg:z       - /mnt/TOP_DIR_TO_SHARE/:/w:z       environment:       LD_PRELOAD: /usr/lib/libmimalloc-secure.so.NOPE       # enable mimalloc by replacing "NOPE" with "2" for a nice speed-boost (will use twice as much ram)         PYTHONUNBUFFERED: 1       # ensures log-messages are not delayed (but can reduce speed a tiny bit)       stop_grace_period: 15s  # thumbnailer is allowed to continue finishing up for 10s after the shutdown signal     healthcheck:       # hide it from logs with "/._" so it matches the default --lf-url filter.       test: ["CMD-SHELL", "wget --spider -q 127.0.0.1:3923/?reset=/._"]       interval: 1m       timeout: 2s       retries: 5       start_period: 15s

Create data directory /home/USER/Copyparty/data In data directory, create some_config.conf, change [accounts] section

YAML

# not actually YAML but lets pretend: # -*- mode: yaml -*- # vim: ft=yaml: # append some arguments to the commandline; # accepts anything listed in --help (leading dashes are optional) # and inline comments are OK if there is 2 spaces before the '#' [global] # p: 8086, 3939 # listen on ports 8086 and 3939 e2dsa # enable file indexing and filesystem scanning e2ts # and enable multimedia indexing # z, qr # and zeroconf and qrcode (you can comma-separate arguments) # create users: [accounts] USERNAME: 123 # username: password # create volumes: [/] # create a volume at "/" (the webroot), which will . # share the contents of "." (the current directory) accs: r: * # everyone gets read-access, but rw: USERNAME # the user "USERNAME" gets read-write

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

# not actually YAML but lets pretend: # -*- mode: yaml -*- # vim: ft=yaml:   # append some arguments to the commandline; # accepts anything listed in --help (leading dashes are optional) # and inline comments are OK if there is 2 spaces before the '#' [global] #  p: 8086, 3939  # listen on ports 8086 and 3939   e2dsa  # enable file indexing and filesystem scanning   e2ts   # and enable multimedia indexing #  z, qr  # and zeroconf and qrcode (you can comma-separate arguments)   # create users: [accounts]   USERNAME: 123   # username: password   # create volumes: [/]         # create a volume at "/" (the webroot), which will   .         # share the contents of "." (the current directory)   accs:     r: *    # everyone gets read-access, but     rw: USERNAME  # the user "USERNAME" gets read-write

Update/run script update.sh

Shell

echo Stopping Copyparty... sudo docker stop copyparty echo Pulling new images... sudo docker pull copyparty/ac:latest echo Prunning unused images... sudo docker image prune -f echo Prunning unused containers... sudo docker container prune -f echo Running Copyparty... cd /home/USER/Copyparty sudo docker compose up -d

1 2 3 4 5 6 7 8 9 10 11

echo Stopping Copyparty... sudo docker stop copyparty echo Pulling new images... sudo docker pull copyparty/ac:latest echo Prunning unused images... sudo docker image prune -f echo Prunning unused containers... sudo docker container prune -f echo Running Copyparty... cd /home/USER/Copyparty sudo docker compose up -d

Run the script and check if the site works by navigating to: http://IP_OR_DOMAIN:3923

HomeAssistant Voice Assist ecosystem docker-compose.yml

YAML

networks: network-voiceAssist: driver: bridge services: ## whisper whisper-voiceAssist: container_name: whisper-voiceAssist image: rhasspy/wyoming-whisper command: --model tiny-int8 --language en volumes: - /home/czupak/VoiceAssist/Whisper:/data environment: - TZ=Europe/Warsaw restart: unless-stopped networks: - network-voiceAssist ports: - 10300:10300 ### piper piper-voiceAssist: container_name: piper-voiceAssist image: rhasspy/wyoming-piper command: --voice en_US-amy-medium volumes: - /home/czupak/VoiceAssist/Piper:/data environment: - TZ=Europe/Warsaw restart: unless-stopped ports: - 10200:10200 networks: - network-voiceAssist ### OpenWakeWord openWakeWord-voiceAssist: container_name: openWakeWord-voiceAssist image: rhasspy/wyoming-openwakeword command: --preload-model 'ok_nabu' volumes: - /home/czupak/VoiceAssist/OpenWakeWord:/data environment: - TZ=Europe/Warsaw restart: unless-stopped ports: - 10400:10400 networks: - network-voiceAssist expose: - 10400 ### Satellite my-satellite: image: sker65/wyoming-satellite container_name: my-satellite ports: - 10700:10700 networks: - network-voiceAssist devices: - /dev/snd:/dev/snd group_add: - audio restart: unless-stopped command: > --vad --vad-trigger-level 1 --vad-threshold 0.6 --debug --uri 'tcp://0.0.0.0:10700' --wake-word-name 'ok_nabu' --mic-command "arecord -D plughw:CARD=MS -r 16000 -c 1 -f S16_LE -t raw" --snd-command "aplay -D plughw:CARD=MS -r 22050 -c 1 -f S16_LE -t raw"

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70

networks:   network-voiceAssist:     driver: bridge services: ## whisper   whisper-voiceAssist:     container_name: whisper-voiceAssist     image: rhasspy/wyoming-whisper     command: --model tiny-int8 --language en     volumes:       - /home/czupak/VoiceAssist/Whisper:/data     environment:       - TZ=Europe/Warsaw     restart: unless-stopped     networks:       - network-voiceAssist     ports:       - 10300:10300 ### piper   piper-voiceAssist:     container_name: piper-voiceAssist     image: rhasspy/wyoming-piper     command: --voice en_US-amy-medium     volumes:       -  /home/czupak/VoiceAssist/Piper:/data     environment:       - TZ=Europe/Warsaw     restart: unless-stopped     ports:       - 10200:10200     networks:       - network-voiceAssist ### OpenWakeWord   openWakeWord-voiceAssist:     container_name: openWakeWord-voiceAssist     image: rhasspy/wyoming-openwakeword     command: --preload-model 'ok_nabu'     volumes:       - /home/czupak/VoiceAssist/OpenWakeWord:/data     environment:       - TZ=Europe/Warsaw     restart: unless-stopped     ports:       - 10400:10400     networks:       - network-voiceAssist     expose:       - 10400 ### Satellite   my-satellite:     image: sker65/wyoming-satellite     container_name: my-satellite     ports:       - 10700:10700     networks:       - network-voiceAssist     devices:       - /dev/snd:/dev/snd     group_add:       - audio     restart: unless-stopped     command: >       --vad       --vad-trigger-level 1       --vad-threshold 0.6       --debug       --uri 'tcp://0.0.0.0:10700'       --wake-word-name 'ok_nabu'       --mic-command "arecord -D plughw:CARD=MS -r 16000 -c 1 -f S16_LE -t raw"       --snd-command "aplay -D plughw:CARD=MS -r 22050 -c 1 -f S16_LE -t raw"

 

Raspberry Pi Models

Polymer Shrinkage Rates

Source: https://www.youtube.com/watch?v=I52dAzPiIP8

Storage Systems

Gridfinity Honey Comb Storage Wall

TPU Shore Scale of hardness

95A is the most commonly available. Others are hard to find and are more expensive.

Kingdom Come: Deliverance

Useful sources How to Fight – Advanced Fighting / Combat Guide Ultimate Armor Guide Mods

Adobe Alternatives

Free, open source or single purchase Adobe alternatives.